17 Years manufacturer Mono-Crystalline 10W Solar Panel Manufacturer in South Africa
Short Description:
We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for 17 Years manufacturer Mono-Crystalline 10W Solar Panel Manufacturer in South Africa, We warmly welcome you to establish cooperation and create a bright future together with us
Mono-Crystalline 10W Solar Panel
Technical parameter
Maximum Power(W) 10W
Optimum Power Voltage(Vmp) 17.56V
Optimum Operating Current(Imp) 0.58A
Open Circuit Voltage(Voc) 21.35V
Short Circuit Current(Isc) 0.64A
Mechanical Characteristics
Cell Type Mono-crystalline 52x35mm
No of Cell 36 (4x9pcs)
Dimensions 250x370x17mm
Weight 1.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 52*35mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
The BATTERY EXTRA EX02 12-120-800 is unique in the fact it will work with all battery voltages from 12 to 120 volts and capacities. Up to 3,000 Ah
It is always best to test your batteries before using the BATTERY EXTRA. This will confirm if a battery can be saved or improved. Even New batteries can suffer from being sulphated if they were badly stored before you bought them.
Always be aware that when handling batteries you should wear goggles and gloves.
First do a visible inspection. Replace any battery that has a cracked or broken case.
Clean or replace any dirty damaged or rusty connections. On wet batteries check the water level, make sure the water just cover the plates, do not overfill the batteries.
Fill only with distilled water. Be aware that the battery solution is corrosive.
Please follow me on these channels ( jwsolarusa ) on:
Google+
https://plus.google.com/collection/kwKoHB
OFF-GRID SOLAR SYSTEM: https://www.youtube.com/playlist?list=PLSNjIRSnUPDLovhitt8VWciXC6wWbOHbX&jct=HmigL8AwIRJT7DPKKeYFPEeKXN_16Q
YouTube channel:
http://www.youtube.com/channel/UCm8Raa6JdTXTNmjnF5OTcnA
Facebook Page
http://m.me/1806732252931962
https://www.facebook.com/jwsolarusaMN-561208810741192/about/
Twitter:
@jwsolarusa
Instagram:
@jwsolarusa
Tumblr:
+jwsolarusa
Nuts to bolts – designing and building an electrical system from scratch.