16 Years manufacturer Mono-Crystalline 30W Solar Panel for Zimbabwe Factories

Short Description:


Product Detail

Product Tags

Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for 16 Years manufacturer Mono-Crystalline 30W Solar Panel for Zimbabwe Factories, Our mission is to help you create long-lasting relationships with your clients through the power of promotional products.


Mono-Crystalline 30W Solar Panel

Technical parameter

Maximum Power(W)                           30W

Optimum Power Voltage(Vmp)        17.66V

Optimum Operating Current(Imp)    1.71A

Open Circuit Voltage(Voc)                 21.39V

Short Circuit Current(Isc)                   1.88A

Mechanical Characteristics

Cell Type Mono-crystalline                125×41.6mm

No of Cell                                             36 (4x9pcs)

Dimensions                                        449x554x25mm

Weight                                                  2.8Kg

Front Glass                                         3.5mm,High Transmission, Low Iron,Tempered Glass

Junction box                                        IP65 Rated

Output Cable                                      TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                 -40°C ~ + 85°C

Maximum System Voltage:                    600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 125*41.6mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • Visit our website for more information: http://www.seawardsolar.com/products/solar-power-clamp

    An informative short film highlights how a highly versatile new AC/DC clamp meter can be used for effective power measurement and diagnostic testing on solar PV systems.

    Available at (please insert Seaward Solar website link to film for news release version), the demo shows how the high performance Seaward Solar Power Clamp is used to measure DC and AC circuit power, in addition to true RMS voltage and current, harmonic distortion, power factor, resistance & continuity, diode check and capacitance.

    The advanced new power meter has been specially designed for use by solar PV installers and technicians to measure the efficiency of PV systems, assess the performance of the inverter and carry out troubleshooting fault testing to ensure that system components are working properly.

    For fast and simple power efficiency analysis, the Seaward Power Clamp simply clips over the cable to measure current from the inverter and the supplied in-line connectors can be used to measure the DC voltage whilst the PV modules are connected to the inverter, giving an accurate reading of the power whilst the system is operational.

    The new Seaward Power Clamp also has full clamp on multimeter functions and is suitable for use on systems up to 600A AC or DC current and 1000V. The new unit is supplied with test leads and probes and comes in an all-inclusive test kit carrying case.



    Using some scraps around the homestead I built a solar panel mount. Using some old car batteries and few bits for the junk yard you can build a battery charging station that can be used independent from the power grid. In WROL this unit will be very useful to charge computers, I phone, I pad, and battery chargers.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    WhatsApp Online Chat !