16 Years Factory Mono-Crystalline 180W Solar Panel Japan Factory
Short Description:
We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our management ideal for 16 Years Factory Mono-Crystalline 180W Solar Panel Japan Factory, If you have any comments about our company or products, please feel free to contact us, your coming mail will be highly appreciated.
Mono-Crystalline 180W Solar Panel
Technical parameter
Maximum Power(W) 180W
Optimum Power Voltage(Vmp) 36.42V
Optimum Operating Current(Imp) 4.96A
Open Circuit Voltage(Voc) 44.45V
Short Circuit Current(Isc) 5.44A
Mechanical Characteristics
Cell Type Mono-crystalline 125x125mm (5 inch)
No of Cell 72 (6x12pcs)
Dimensions 1580x808x35mm
Weight 14.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Laser cutting of solar cells
Mono and poly-crystalline silicon wafers can be cut with very high precision.
More information on http://www.rofin.com
Here is how to make an AM radio transmitter, much easier than the FM… so enjoy!
Send me mail :
PO box 1172
Orem, UT
Support me on Patreon to fund better experiments : https://www.patreon.com/keystonescience
Join the discord discussion! : https://discord.gg/rvnbhNN
The pen I use was donated by: https://hobblecreekcraftsman.com
Intro Made by Tate Storey, check out his channel! : http://youtu.be/dCyHF8QJzHU
My multimeter was donated from https://goo.gl/uOGdwd
————————————-
List of Materials:
1- 1 MHz crystal oscillator
2- step up Transformer
3- 4AA battery case
4- PCB perf board
5- ( optional ) LM386 op amp
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Piezo Electric Crystal Video: https://youtu.be/EhnmXC-P_ow
Induction Video: https://youtu.be/FXRBkQ2tniY
FM transmitter: https://youtu.be/lnyvsy4v9f0
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Inquires: [email protected]
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
music:
Broke for free, Night owl ; pixel land, Kevin Macleod
Licensed under Creative Commons: By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Twitter: @Keyst0neScience
Facebook : https://www.facebook.com/KeystoneScience/ ( I never get on facebook though )