15 Years manufacturer Poly-crystalline Solar Panel 90W to Amsterdam Factories
Short Description:
We emphasize development and introduce new products into the market every year for 15 Years manufacturer Poly-crystalline Solar Panel 90W to Amsterdam Factories, We will do our best to meet your requirements and are sincerely looking forward to developing mutual beneficial business relationship with you!
Poly-crystalline Solar Panel 90W
Technical parameter
Maximum Power(W) 90W
Optimum Power Voltage(Vmp) 18.33V
Optimum Operating Current(Imp) 4.91A
Open Circuit Voltage(Voc) 21.96V
Short Circuit Current(Isc) 4.89A
Mechanical Characteristics
Cell Type Poly-crystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1008x678x35mm
Weight 8.0KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*104mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
This is an installation I did at a small off grid farm which did not have running water at this location. Rather than screw around with permits and grid hookup for 110v power, we went entirely with a 12v “temporary building” solution that was vastly under budget, and has proven extremely reliable even in pretty harsh weather. It is basically a tiny building installed variant of the small portable off grid solar generator system that I detailed in another short video series (see playlist). This one however scaled up a lot more battery capacity to run the water pump which I will detail later when the weather is better.
Dokumentasi Project Kerjasama antara Yayasan Energi Bersih Indonesia dengan ICCTF ( Indonesian Climate Change Trust Fund) Bappenas untuk pembangunan Solar Water Pump System di Banyumeneng 2.