15 Years Factory wholesale Mono-Crystalline 30W Solar Panel Factory from Los Angeles
Short Description:
We have many excellent staff members good at marketing, QC, and dealing with kinds of troublesome problem in the production process for 15 Years Factory wholesale Mono-Crystalline 30W Solar Panel Factory from Los Angeles, Welcome to set up long-term relationship with us. Best Price For Good Quality in China.
Mono-Crystalline 30W Solar Panel
Technical parameter
Maximum Power(W) 30W
Optimum Power Voltage(Vmp) 17.66V
Optimum Operating Current(Imp) 1.71A
Open Circuit Voltage(Voc) 21.39V
Short Circuit Current(Isc) 1.88A
Mechanical Characteristics
Cell Type Mono-crystalline 125×41.6mm
No of Cell 36 (4x9pcs)
Dimensions 449x554x25mm
Weight 2.8Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*41.6mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Solar Thermal air heater! Easy DIY. this vid. is an overview of my latest solar air heater. the design uses an “air channel” design to force the air to travel a route well over 12 feet inside of the collector. as the air rises it’s heated to well over 150F. (tested w/outside temp in low 50′s). no metal cans needed for this one (but optional aluminum flashing strips can be added to further increase temps). *or for the reuse/recycle option, try crushed aluminum cans along the channel. air is pulled out of collector by a small thin case fan …and is run using a small solar panel (3 to 5 watt panel being the optimal size). the collectors surface area is roughly twice the size of any i’ve made so far (but it’s super-slim design still keeps it lightweight). *the full video (posted 3 days prior) with full “detailed building instructions” can be found on my youtube channel video page. couple of things: i designed the collector to be able to pull air from outside or inside. to pull air from inside home just hook up a second vent pipe onto the air inlet at the bottom and feed both tubes in. also note; due to the collectors slim design i used a very thin case fan to allow for proper airflow. (if you want to use a standard 25mm style case fan, consider using 2×3 or 2×4 lumber for max. airflow (and adjust the internal dowel sizes accordingly).
Sungold solar 3x35w 2016 version 2.0.
www.sungoldsolar.com
105w folding solar panel kit
3*35w three folding solar module
Thin and light folding solar panel
Folding solar panel with carrying bag