14 Years manufacturer Poly-crystalline Solar Panel 300W Factory from Niger
Short Description:
To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for 14 Years manufacturer Poly-crystalline Solar Panel 300W Factory from Niger, We warmly welcome you to establish cooperation and create a bright future together with us
Poly-crystalline Solar Panel 300W
Technical parameter
Maximum Power(W) 300W
Optimum Power Voltage(Vmp) 37.15V
Optimum Operating Current(Imp) 8.08A
Open Circuit Voltage(Voc) 45.30V
Short Circuit Current(Isc) 8.87A
Mechanical Characteristics
Cell Type Poly-crystalline 156x156mm (6 inch)
No of Cell 72 (6x12pcs)
Dimensions 1956x992x50mm
Weight 22.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
On November 19, 2014, Fraunhofer Center for Sustainable Energy Systems CSE successfully installed and commissioned their Plug and Play Photovoltaic (PV) System in front of a public audience for the first time.
Funded by the U.S. Department of Energy (DOE) SunShot Initiative, the Plug and Play PV System approach revolutionizes the ease of installation, while improving safety during installation and operation. Once commercially available, homeowners will be able to purchase a PV system at their local home improvement store, and install it in less than 10 hours – as easily as installing a washer / dryer combination. The speed of installation and the automated permitting, inspection and utility interconnection processes designed into the system will drive the cost of an installed PV system from today’s cost of over $4/W down to $1.50/W in 2020. This will enable the widespread adoption of solar for residential rooftops.
http://solarpanelinstallationbay.com
Buy Solar Panels,Buy solar panel,Buying solar panels,Buy solar panels online
Everyone who can use a screw driver and a hammer can install solar panels. Everyone with a desire to harness solar power can learn how to do it. Where there is lack of know-how, do it yourself guides like the one in this post can take you step by step through the installation process. If my mom can do it, everyone can.