14 Years Factory Poly-crystalline Solar Panel 60W to Mongolia Manufacturers
Short Description:
Our company since its inception, always regards product quality as enterprise life, continuously improve production technology, improve product quality and continuously strengthen enterprise total quality management, in strict accordance with the national standard ISO 9001:2000 for 14 Years Factory Poly-crystalline Solar Panel 60W to Mongolia Manufacturers, Welcome to set up long-term relationship with us. Best Price For Good Quality in China.
Poly-crystalline Solar Panel 60W
Technical parameter
Maximum Power(W) 60W
Optimum Power Voltage(Vmp) 17.35V
Optimum Operating Current(Imp) 3.46A
Open Circuit Voltage(Voc) 21.16V
Short Circuit Current(Isc) 3.80A
Mechanical Characteristics
Cell Type Poly-crystalline 156 x 65mm
No of Cell 36 (4x9pcs)
Dimensions 678x657x35mm
Weight 5.0Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*65mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
WorldWater & Solar Technologies – Solar-Hybrid Expeditionary Power & Purification System. SHEPS is a solar hybrid-powered, stand-alone water pump, purifier and desalinator, as well as power generator built into rugged, rolling man-portable cases. Fully operational in under 30 minutes. Environmentally friendly, quiet and pollution-free. For additional information please visit worldwatersolar.com.
Trucks that sit on the lot for long periods of time have a hard time keeping batteries fully charged. This is because parasitic loads slowly drain batteries over time. If a truck sits for more than a few months it will more than likely require a jumpstart to get moving again.
Purkeys has developed a way to utilize energy from the sun to help counteract parasitic loads, in turn providing longer battery life. They have created a portable and easy to use solar converter called, the Solar Dash. According to Purkeys’ Chief Creative Engineer Bruce Purkey, “In the right sun conditions, the Solar Dash can provide enough energy to maintain a truck’s batteries from day to day.”
The Solar Dash comes with a 20W solar panel, conversion controller, and an adapter plug that plugs directly into a 12V power port, allowing fleets to maintain a high state of charge from inside the truck. It’s as simple as placing the panel on the dash, plugging it in, and walking away.
The system is great for dealers; allowing them to keep trucks ready to move, no matter how long they sit on the lot.