13 Years Factory wholesale Poly-crystalline Solar Panel 3W for Bhutan Manufacturers
Short Description:
We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our management ideal for 13 Years Factory wholesale Poly-crystalline Solar Panel 3W for Bhutan Manufacturers, We encourage you to make contact as we are looking for partners in our venture. We are sure you will find doing business with us not only fruitful but also profitable. We are ready to serve you with what you require.
Poly-crystalline Solar Panel 3W
Technical parameter
Maximum Power(W) 3W
Optimum Power Voltage(Vmp) 9V
Optimum Operating Current(Imp) 0.34A
Open Circuit Voltage(Voc) 10.8V
Short Circuit Current(Isc) 0.37A
Mechanical Characteristics
Cell Type Polycrystalline
No of Cell 18 (2x9pcs)
Dimensions 145x245x18mm
Weight 0.52KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 10A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
http://www.uec-electronics.com/mobile-power-products/power-generation/
- Solar Power Collection
- Hybrid Power Generation
- High Density Energy Storage
- Rapid ROI – Fuel, Maintenance, and Rapid Logistics
- Reliable and Combat Proven
UEC Electronic’s Ground Renewable Expeditionary Energy Network System (GREENS) saves fuel, money, and reduces the frequency of resupply missions. GREENS is the first viable solution to replace traditional fuel-fired generators. GREENS was developed as a USMC Program of Record but has applicability to both civilian and military customers. The system collects solar energy and converts it into useable power. Excess solar energy is stored in the array of high energy density battery systems (HEDBS) for use when solar energy is insufficient. The system is light-weight and man portable. The GREENS HEDBS is safe, and has been approved as UN/DOT Class 9 tested for commercial shipment.
———————————————————————————————————–
One GREENS will provide up to 1kW of power, and up to five systems can be paralleled together to provide 5 kW of power. No formal operator training is required. System deployment time is quick less than 15 Minutes by an untrained user. The system can be used as a completely renewable solution, or can be used in a hybrid configuration with a generator. If used as a hybrid solution, the GREENS controller will auto-start the generator if necessary to recharge the batteries, and will run the generator at peak efficiency.
การนำ Charge controller Solar Cell มาใช้กับปั้มชัก 1นิ้ว มอเตอร์ dc 12v 300 w เพือ่ให้ทำงานอัตโนมัติในเวลากลางคืน โดยต้องใช้สายไฟเส้นใหญ่ในการต่อเข้า Charge controller และตั้งโหลด ออฟ ให้ต่ำไว้ก่อน เพราะมอเตอร์จะกระชากไฟในการเปิดการทำงานครั้งแรก และจะหยุดการทำงานตาม v ที่ได้ตั้งค่าไว้ การใช้งานมาหลายเดือนอุปกรณ์สามารถใช้งานได้ดี แบตขนาด 75 a 2ลูก สามารถใช้งานได้นาน 6-7 ชม.
Charge controller Solar Cell for use with a 1-inch induction pump motor dc 12v 300 w for automatic operation at night. By using a large wires to connect to the Charge controller and set the load to low. Because the motor will snatch the light on the first turn. And will stop working as set up. The device can work for many months, the battery size 75 a 2 balls can be used for 6-7 hours.