13 Years Factory wholesale Mono-Crystalline 200W Solar Panel Factory in Canberra
Short Description:
Our company has been focusing on brand strategy. Customers' satisfaction is our best advertising. We also supply OEM service for 13 Years Factory wholesale Mono-Crystalline 200W Solar Panel Factory in Canberra, We warmly welcome your participation based on mutual benefits in the near future.
Mono-Crystalline 200W Solar Panel
Technical parameter
Maximum Power(W) 200W
Optimum Power Voltage(Vmp) 37.29V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 45.48V
Short Circuit Current(Isc) 5.89A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 72 (6x12pcs)
Dimensions 1580x808x35mm
Weight 14.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
How to install solar panel with simple UPS and disconnect Ups charging
I wanted to show what I usually cook on a typical day of solar cooking when the sky is good and clear. Today, I cooked a peach cobbler type cake, and I wanted to show you the focal point of the sun to show why it cooks so hot. Also, to show you my new cooker, made simply out of a large steel bowl, with two large clear glass bowls to hold heat in, which had a pie pan with a cake rack to lift the pot up so heat circulates underneat the pot for thorough cooking. I am cooking rice, and it only took 2 hours to slow cook, almost got over done on the top because of the focal point on the top of the rice.
The reflector, also made from simple posterboard you would buy for a school project, and aluminum foil glued to it with cheap elmers type glue, only paid 50 cents for it. I dilute the glue 50/50 water/glue, then brush it on the posterboard, and lay the foil on with shiney side facing up.
Sorry again for the videos being so short, my digital camera has only 60 seconds at a time for video, and I don’t have anyone here during the day to hold the camera for me to fit more into that 60 seconds.
