13 Years Factory Poly-crystalline Solar Panel 50W Factory in Nigeria
Short Description:
With this motto in mind, we have become one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for 13 Years Factory Poly-crystalline Solar Panel 50W Factory in Nigeria, If you have any comments about our company or products, please feel free to contact us, your coming mail will be highly appreciated.
Poly-crystalline Solar Panel 50W
Technical parameter
Maximum Power(W) 50W
Optimum Power Voltage(Vmp) 18.43V
Optimum Operating Current(Imp) 2.71A
Open Circuit Voltage(Voc) 22.48V
Short Circuit Current(Isc) 2.98A
Mechanical Characteristics
Cell Type Poly-crystalline 156 x 52mm
No of Cell 36 (4x9pcs)
Dimensions 678x542x25mm
Weight 4.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*52mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Charge your laptop, phone, tablet and even a small refrigerator with 200 watts of solar and a 410 watt inverter. Here we walk through the steps involved slowly to show how to convert any van into a solar powered power station. In this case we used a 2006 Chrysler Town and country, but the principles are the same on any vehicle. Below are actual or suggested parts used in this install.
KINGLAKE Auto Door Clip Panel Trim Removal Tools: http://amzn.to/2n0JljU
LCD Digital Volt Voltage Panel Meter: http://amzn.to/2n0QIYo
Schumacher PID-410 410 Watt Power Inverter: http://amzn.to/2m0PmrL
Renogy 200 Watt 12 Volt Monocrystalline Solar Starter Kit with 40A Rover MPPT Charge Controller : http://amzn.to/2n0MdgC
If you know someone who could benefit from this video, please SHARE it with a friend!
Thanks for supporting this site by using this link to Amazon.
We’ll make a small percentage on your purchase and it won’t
cost you anything, even if you buy something unrelated.
http://amzn.to/2dZhDuG
Banjo Short by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Artist: http://audionautix.com/
Kensun 300 inverter + EcoWorthy Solar 10w Panel with charge Controller + Energizer ENC-2A Charger Power Station Setup
Don’t forget to Subscribe to my channel and help Amazon Affiliates like myself !!
Kensun 300 watt inverter = https://goo.gl/PJiKHo (affiliate)
Yosh Waterproof Phone Case = https://goo.gl/N9nBrU (affiliate)
Energiser Battery Maintainer = https://goo.gl/61xMTF (affiliate)
ECO-WORTHY 10W Solar Panel with Controller = https://goo.gl/8hhhtK (affiliate)
https://uthos9.wixsite.com/survivalguy
