12 Years manufacturer Mono-Crystalline 80W Solar Panel in Roman
Short Description:
We always continually provide you with the most conscientious customer service, and the widest variety of designs and styles with finest materials. These efforts include the availability of customized designs with speed and dispatch for 12 Years manufacturer Mono-Crystalline 80W Solar Panel in Roman, We cordially welcome customers from at home and abroad to join us and cooperate with us to enjoy a better future.
Mono-Crystalline 80W Solar Panel
Technical parameter
Maximum Power(W) 80W
Optimum Power Voltage(Vmp) 15.90V
Optimum Operating Current(Imp) 5.03A
Open Circuit Voltage(Voc) 18.58V
Short Circuit Current(Isc) 5.59A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 36 (4x9pcs)
Dimensions 906x670x35mm
Weight 7.2KGS
Front Glass 3.2mm,High Transmission, Low iron, tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length: 900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operating Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
This is a semi-portable solar unit that I made here in Metro Manila, Philippines. It features an 80 watt polycrystalline solar panel from cdrking, a 40 amp hour deep cycle solarmaster battery from motolite, a 10 amp charge controller from cdr-king, a watt-meter which monitors the battery and power usage, a 100 watt AC inverter from cdrking and a 3amp DC-DC 5v USB adapter. The solar panels tilt angle can be easily changed by adjusting a screw that goes through the arms either side.
I had the idea to make this unit after my time as a volunteer driver with Oplan Hatid, at Villamor Airbase. Aside from transporting survivors to their families, I also setup and maintained a wifi network which was used by volunteers to lookup maps, appeal for donations and even just kill time while waiting for a plane to land with more survivors.
While Vilamor airbase was a great host, Oplan Hatid did hit a few bumps along the way , I won’t go into the “politics” of it, but the group was moved a few times and there were occasions when power wasn’t easily available. Thats when I had the idea of creating a portable solar unit that could be loaded onto the back of a truck and taken to any location to immediately provide a redundant wifi network, small device charging and other basic power needs. What do I mean by redundant wifi network? Essentially using multiple routers and 3g providers like Globe, Sun & Smart to ensure maximum uptime with minimal maintenance.
Amazon-UK: http://npad.us/neck/2/uk/B00CJ39YDA/review
For Ac output wind turbinethe advanced wind/solar hybrid controller is specially designed for or high-end small-scale and especially suitable for street light monitoring can or and panel at the same time and transform the wind&solar energy into electricity for the Dc load use, with excess stored batteries.
Performance Features:Superior military-grade components to ensure the product stability.Perfect protection function, thus the has higher reliability.Check and set all operation parameters as requirement from Lcd display.Voltage limiting and current-limiting charge mode, ensures battery in the best charging status.Two Dc output, light-control, time-control, constant and multiple selection.Pwm stepless unload which burn the power dump load, making the in of quality aluminum alloy appearance, with size and good cooling effect.European Ce certification.technical Parameters:model:sg-wcl40012rated Voltage:12vrated Power:400wwind Maximum Input Power:600wrated Power:150wwind Current:50aunload Voltage(factory default):14vunload Current(factory default):25adumpload Start default):13.5vcharge Shutoff default):14.5vwind Brake Current:33abattery Over Discharge Voltage:10.8vbattery Recovery Voltage:12voutput Protection:16vweight and Size:14215082mm,1.9kg