12 Years manufacturer Mono-Crystalline 60W Solar Panel Manufacturer in Luxembourg
Short Description:
We aim to find out quality disfigurement from the production and supply the best service to domestic and overseas customers wholeheartedly for 12 Years manufacturer Mono-Crystalline 60W Solar Panel Manufacturer in Luxembourg, We will do our best to meet your requirements and are sincerely looking forward to developing mutual beneficial business relationship with you!
Mono-Crystalline 60W Solar Panel
Technical parameter
Maximum Power(W) 60W
Optimum Power Voltage(Vmp) 18.46V
Optimum Operating Current(Imp) 3.25A
Open Circuit Voltage(Voc) 22.51V
Short Circuit Current(Isc) 3.57A
Mechanical Characteristics
Cell Type Mono-crystalline 125 x 83mm
No of Cell 36 (4x9pcs)
Dimensions 821x554x35mm
Weight 5.0Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*83mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Go to http://crossmyt.com/thankyou.htm
Have you wondered whether you could take part in renewable energy for your home? You have heard about all of the people going solar these days but it seems to be quite expensive, and it is if you do it the conventional way.
We have come across a program that will teach you how to do DIY solar panels affordably and relatively easily. This was the result of a university project that sought to find the best and most affordable DIY solar power systems and wind power systems that the average person could build. When they were done the results were built and tested by high school students to show that anyone could build them. They built 200 watt solar panel systems for about $200 and 1000 watt wind power systems for about $100.
This program gives detailed schematics as well as all of the instructions necessary to build either or both of these power systems. It also will tell you where to find all of the materials necessary, mostly at your local hardware store. You will also learn how to connect the system to your home as well as how to maintain the system. Along with the detailed instructions, you receive training videos as well. These systems that you can build are 100% safe and 100% legal.
You can not only save on your energy costs but you can also become more environmentally friendly. And wouldn’t it be nice to see your utility bills go down instead of that upward spiral.The next time the power goes out in your area, you can be the one that still has electricity because of your diy solar power system.
If you end up getting this program you will have no regrets, especially since it comes with a money back guarantee. The best thing is that you can get this information on diy solar panels and wind turbines for less than $50.
Australia’s largest solar photovoltaic (PV) power project reached a major construction milestone on April 12, 2012, as contractor and technology provider, First Solar, Inc. (Nasdaq: FSLR), joined owners Verve Energy and GE (NYSE: GE) unit GE Energy Financial Services to mark the commencement of panel installation at the Greenough River Solar Farm. WA Energy Minister, Peter Collier, landholders, members of the Geraldton community and local contractors were present to help celebrate this achievement.
For more information, visit GE Energy Financial Services at: http://www.geenergyfinancialservices.com
