11 Years manufacturer Poly-crystalline Solar Panel 50W Algeria Manufacturers
Short Description:
Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction for 11 Years manufacturer Poly-crystalline Solar Panel 50W Algeria Manufacturers, Welcome friends from all over the world come to visit, guide and negotiate.
Poly-crystalline Solar Panel 50W
Technical parameter
Maximum Power(W) 50W
Optimum Power Voltage(Vmp) 18.43V
Optimum Operating Current(Imp) 2.71A
Open Circuit Voltage(Voc) 22.48V
Short Circuit Current(Isc) 2.98A
Mechanical Characteristics
Cell Type Poly-crystalline 156 x 52mm
No of Cell 36 (4x9pcs)
Dimensions 678x542x25mm
Weight 4.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*52mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
FlexLam, by Automation Alternatives, Inc., is a versatile and innovative laminator designed to increase productivity, provide accurate registration and reduce defects. It addresses many common laminating problems and is a perfect tool for fast and accurate multilayer lamination applications.
FlexLam Features:
Servo-controlled, pneumatically pressure-adjusted roller guarantees smooth, bubble-free lamination,
Pins and vacuum table hold material stationary allowing easy peel-off of release liners from selective adhesives,
Long retractable tooling pins allow accurately registered multi-layer lamination, reducing sub-assemblies, shorten lead time and decrease WIP
Configurable pins and large vacuum bed allows multiple setups on the bed to support multi-cell use in a lean manufacturing environment,
Micro-processor-controlled with multi-mode functionality,
Easy and safe to operate,
Dual redundancy safety system,
Ample storage shelving, and
Cost competitive.
Email:[email protected]
Skype:xltaser_xu
whatsapp/cell:0086 15806685630