11 Years Manufacturer Poly-crystalline Solar Panel 250W Factory in Argentina
Short Description:
Adhering to the principle of "quality, service, efficiency and growth", we have gained trusts and praises from domestic and international client for 11 Years Manufacturer Poly-crystalline Solar Panel 250W Factory in Argentina, We welcome you to join us in this path of creating a prosperous and efficient business together.
Poly-crystalline Solar Panel 250W
Technical parameter
Maximum Power(W) 250W
Optimum Power Voltage(Vmp) 30.25V
Optimum Operating Current(Imp) 8.26A
Open Circuit Voltage(Voc) 36.61V
Short Circuit Current(Isc) 8.89A
Mechanical Characteristics
Cell Type Polycrystalline 156x156mm (6 inch)
No of Cell 60 (6x10pcs)
Dimensions 1640x990x40mm
Weight 18.5KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
if you want to run your dc solar fans safely direct from solar panel, you need to watch this video,
Also watch my other videos about solar system link below
1. How to check Solar Ups Inverter Battery in Urdu Hindi Fault no 2
2. solar fan for home detail in Urdu/Hindi Part 5 assembling and installation
3. How to connect Solar Panels in Series in Urdu Hindi Part 2 solar panel Series con
My Facebook Group link:
https://www.facebook.com/groups/407856312922161/
This is how I made a really cheap solar pool heater, and it works! It is a simple coiled hose attached to a wood frame and placed on the hot concrete. The pump is for a pond and moves 900 gallons per hour. The hose is 3/4″ and about 200 foot long. It will heat the water about 5 degrees above the ambient pool temperature on a partly cloudy day. The pool is large, so this setup is smaller than I should use. As is, it barely compensates for the temperature loss at night. I plan on adding a lot more hose and making a nicer permanent setup.