11 Years manufacturer Mono-Crystalline 10W Solar Panel Factory for Brisbane
Short Description:
Our goal is to satisfy our customers by offering golden service, good price and high quality for 11 Years manufacturer Mono-Crystalline 10W Solar Panel Factory for Brisbane, "Quality first, Price lowest, Service best" is the spirit of our company. We sincerely welcome you to visit our company and negotiate mutual business!
Mono-Crystalline 10W Solar Panel
Technical parameter
Maximum Power(W) 10W
Optimum Power Voltage(Vmp) 17.56V
Optimum Operating Current(Imp) 0.58A
Open Circuit Voltage(Voc) 21.35V
Short Circuit Current(Isc) 0.64A
Mechanical Characteristics
Cell Type Mono-crystalline 52x35mm
No of Cell 36 (4x9pcs)
Dimensions 250x370x17mm
Weight 1.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 52*35mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
MOBILE SETUP SOLAR POWER!
check out my ham radio playlist
Colector Solar a partir de botellas PET, donde el suministro de agua fría está en la parte inferior, después por diferencia de densidades el agua caliente tiende a moverse hacia la parte superior del colector, El proceso por el cual el agua se calienta es por Radiación convección y conducción ,generando una clase de efecto invernadero dentro de las botellas, por convección el aire se caliente cediéndole el calor al tuvo PVC (21mm-1/2″) después por conducción el PVC le transfiere calor al agua y así este cambia su densidad ,este al estar pintado de color negro tiene la capacidad de retener el calor, y por radiación cuando los rayos penetran las botellas y entregan energía en forma de calor al agua.I created this video with the YouTube Video Editor (http://www.youtube.com/editor)