11 Years Factory wholesale Poly-crystalline Solar Panel 80W Factory from Suriname

Short Description:


Product Detail

Product Tags

We consistently carry out our spirit of ''Innovation bringing development, Highly-quality ensuring subsistence, Management promoting benefit, Credit attracting customers for 11 Years Factory wholesale Poly-crystalline Solar Panel 80W Factory from Suriname, If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.


Poly-crystalline Solar Panel 80W

Technical parameter

Maximum Power(W)                        80W

Optimum Power Voltage(Vmp)        18.13V

Optimum Operating Current(Imp)    4.70A

Open Circuit Voltage(Voc)               21.79V

Short Circuit Current(Isc)                 5.16A

Mechanical Characteristics

Cell Type Poly-crystalline                 156x104mm (6 inch)

No of Cell                              36 (4x9pcs)

Dimensions                          1008x678x35mm

Weight                                  8.3KGS

Front Glass                          3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                    IP65 Rated

Output Cable                                   TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.435%

Temperature Coefficients of Voc:        -0.35%

Temperature Coefficients of Isc:           0.043%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

 

Materials of solar panel

1).Solar Cell——Poly-crystalline solar cell 156*104mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • Solar stringer machine of P. Energy,Created by Italy.



    DIY Solar Panels http://shysky.com/cheap/ Click link for our Guide to Cheap Solar Cells

    DIY solar panels are a great way to save money on your power bill and can be a fun project for you. However, breaking your cells when you try to solder them together can eat away at your savings, not to mention waste your time and effort.

    In this video, we show you how we built a “jig” or form that not only dramatically helps us reduce breaking the solar cells, it also helps make the stings of cells more uniform. It also helps us tab (solder) the solar cells together much quicker, which helps making DIY solar panels much faster, easier and cheaper.

    Try to notice the two grooves we cut in the bottom of the jig. These grooves are meant to be where they tabbing wired and solder go. This allows the tabbing wire to fit below the cells, while keeping the solar cells level.

    We found that the tabbing wire creates an uneven surface when you try to solder the cells together and when you press down with the soldering iron, the uneven surface created by the tabbing wire and solder caused the solar cells to break.

    Before you get started, take some time to create a similar jig to help you create a sort of “aseembly line” form to help you with your green energy project.

    And of course, both Brett and Kurt STRONGLY suggest using “pre tabbed” cells. Pre-tabbed solar cells will not only save you time and trouble, they will save you money in the long run by reducing your broken cells.

    Check out the link below. We’ve created a page that shows you more DIY solar panel tips and recources for finding the cheapest pre-tabbed solar cells.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Star

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    WhatsApp Online Chat !