11 Years Factory wholesale Mono-Crystalline 150W Solar Panel for Johor Manufacturers
Short Description:
"Quality first, Honesty as base, Sincere service and mutual profit" is our idea, in order to develop continuously and pursue the excellence for 11 Years Factory wholesale Mono-Crystalline 150W Solar Panel for Johor Manufacturers, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.
Mono-Crystalline 150W Solar Panel
Technical parameter
Maximum Power(W) 150W
Optimum Power Voltage(Vmp) 17.92V
Optimum Operating Current(Imp) 7.83A
Open Circuit Voltage(Voc) 21.86V
Short Circuit Current(Isc) 8.59A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1485x668x35mm
Weight 11.6KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
http://www.MakeOwnSolarPanel.com
solar panel kits- Make solar panels and save energy.
solar panel kits
solar panels kits
electric solar panel kits
residential solar panel kits
small solar panel kits
rv solar panel kits
solor panel kits
diy solar panel kits
complete solar panel kits
buy solar panel kits
cheap solar panel kits
solar panel kits for
solar panel kits for the
solar panel kits in
solar panel kits for home
solar panel kits for sale
solar panel mounting kits
watt solar panel kits
solar panel repair kits
solar panel kits for homes
grid solar panel kits
solar panel kits for the home
home solar panel kits
solar panel kits for home use
Visit our website for more information: http://www.seawardsolar.com/products/solar-power-clamp
An informative short film highlights how a highly versatile new AC/DC clamp meter can be used for effective power measurement and diagnostic testing on solar PV systems.
Available at (please insert Seaward Solar website link to film for news release version), the demo shows how the high performance Seaward Solar Power Clamp is used to measure DC and AC circuit power, in addition to true RMS voltage and current, harmonic distortion, power factor, resistance & continuity, diode check and capacitance.
The advanced new power meter has been specially designed for use by solar PV installers and technicians to measure the efficiency of PV systems, assess the performance of the inverter and carry out troubleshooting fault testing to ensure that system components are working properly.
For fast and simple power efficiency analysis, the Seaward Power Clamp simply clips over the cable to measure current from the inverter and the supplied in-line connectors can be used to measure the DC voltage whilst the PV modules are connected to the inverter, giving an accurate reading of the power whilst the system is operational.
The new Seaward Power Clamp also has full clamp on multimeter functions and is suitable for use on systems up to 600A AC or DC current and 1000V. The new unit is supplied with test leads and probes and comes in an all-inclusive test kit carrying case.