100% Original Factory Poly-crystalline Solar Panel 60W Wholesale to Switzerland
Short Description:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of 100% Original Factory Poly-crystalline Solar Panel 60W Wholesale to Switzerland, Welcome to set up long-term relationship with us. Best Price For Good Quality in China.
Poly-crystalline Solar Panel 60W
Technical parameter
Maximum Power(W) 60W
Optimum Power Voltage(Vmp) 17.35V
Optimum Operating Current(Imp) 3.46A
Open Circuit Voltage(Voc) 21.16V
Short Circuit Current(Isc) 3.80A
Mechanical Characteristics
Cell Type Poly-crystalline 156 x 65mm
No of Cell 36 (4x9pcs)
Dimensions 678x657x35mm
Weight 5.0Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*65mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
For more Information Visit
http://agradesolarsolutionsaustralia.com.au/
Mobile: 0419 889 555
Address: P.O Box 41 Rosanna Vic 3084
Fax: (03) 9455 0532
Email: [email protected]
ABN: 24605924396
Darren: Hi, I’m Darren from DJ’s Family Butchery here in Yass. I’ve looked at a solar unit in the past and then I’ve got on to Craig from A Grade Solar and we went up into the roof of my shop, I wanted to put a big unit in to compensate nearly my whole electricity on my account but once I was up on the roof with Craig, he talked me out of a big unit because the shade coming from the building next-door was going to affect it for probably 60% of the year, so I’ve gone to a little unit, not making as much from it but I didn’t waste a lot of money on a bigger unit which Craig talked me out of.
Savings for the year, average over the last two years I’ve saved roughly $1500 a year. So, the cost of the unit was $6500, so inside of four years, it will pay for itself and then there’s $1500 profit into my bank.
Topics: solar energy, solar panel, solar panel install, solar panel installation australia, solar panels, off-grid, on-grid, solar solutions, wind power, solar power systems, renewable energy, green energy
The solar charger should be portable ,of course!
Now we have Magic Magnet Solar charger.
It is ideal for business and leisure travel.
The magnet allows it to stay still without any other support.
It will helps the light and slim device stay on the car where we left it without being moved by the wind.
Thanks for watching.
www.sungoldsolar.com
E-mail: [email protected]
